-
Display: 4 digit LED, 0.6" high, with "negative weight",
lb., kg., and TARE lights
-
Analog to digital conversion method: dual slope integration, using
signal from a one piece full bridge 350-ohm strain gauge weight sensor
beam of various thickness of electroplated carbon steel to accommodate
different weight capacities
-
Low power indicator: Displays "Lo" when operating voltage
is below 6 volts.
-
Operating voltage: 6 - 9.5 volts dc. Ac/dc 9v 300ma power adapter
included. Battery holder for the PS series to hold 6 pcs. AA 1.2 volt
nickel cadmium rechargeable batteries, and for the WS series to hold
6 pcs C size battery with charging circuit in scale.
-
Overload indicator: Displays "EEEE" when scale capacity
is exceeded. Includes any tare weight on scale
Siltec PS-5AP high capacity scale |
-
Keypad: Flexible 4-switch membrane keypad for "ON", "OFF", "LB/KG" and "TARE"
-
Tare: Full range of weight capacity. Tare non-functional at negative
weight
-
Calibration: 1-turn potentiometers for zero and span adjustments.
A test pin pair for initiating calibration and displaying the zero
reference point
-
Internal resolution: 10,000 counts
-
External graduation: 1/1000 of weight capacity
-
Accuracy: +/- 2 weight graduations
-
Temperature: Operating: 5 to 40 degrees centigrade, non-condensing
-
Temperature: Storage: -10 to 50 degrees centigrade, non-condensing
-
Automatic zero tracking
-
Remote weight display: Keypad and display mounted in a separate
aluminum box linked to the weighing platform by a six foot cable. Can
be table mounted with platform on floor, or beside platform on floor
-
Siltec warranty: One year parts and labor
