Safety Gate Model |
 |
KidCo Gateway
G-11 Child Safety Gate
Model G5.5 - 5½" Optional Extension Kit: Extends gate
to fit openings up to 41½".
No more than one extension kit per gate |
|
 |
KidCo G-15 Center
Gateway Child Safety Gate
Model G5.5 - 5½" Optional Extension Kit. Extends gate
to fit openings up to 48 1/8".
No more than two extension kits per gate. |
|
 |
KidCo G-35 Wood
Center Child Safety Gate
Model G5.5 - 5½" Optional Extension Kit: Extends gate
to fit openings up to 47".
No more than two extension kits per gate. |
|
 |
KidCo G-20 Child
Safety Gate
Model G24 - 24" Optional Extension: Extends gate to fit openings
up to 66".
No more than one extension per gate. |
|
 |
KidCo G-32 Angle Mount
Child Safety Gate
Model G32 9- 9 " Optional Extension: Extends gate to up to 60" |
|
 |
KidCo G-60 Elongated Child Safety Gate
Model G24 - 24" Optional Extension: Extends gate to fit openings up to 13 feet (156").
No more than four extensions per gate. |
|
 |
KidCo G-80 ConfigureGate
Child Safety Gate
Model G80-8 - 8" Optional Extension.
Model G80-24 - 24" Optional Extension.
No limit to the number of added extensions. |
|
 |
KidCo PD-10 and
PD-20 Play Den
Model G80-8 - 8" Optional Extension.
Model G80-24 - 24" Optional Extension.
It is recommended that optional extensions be added by the pair to keep the
symmetrical shape of the PlayDen |
|
 |
KidCo G-70 HearthGate
Offers protection from the heat and fire of fireplaces, wood
burning stoves and barbecues in addition to the dangers of sharp
corners and the hard, rough surfaces of hearths. Five interlocking
24" sections can be angled or set in a straight line as needed,
and are wall mounted for safety. Base set fits a 6' hearth. Gate
stands 29½" high. Available in Black.
Model G70-8 - 8" Optional Extension.
G70-24 - 24" Optional Extension.
No limit to number of added extensions. |
|
 G-Y Spindle
Many homes have staircases that aren't bordered by a wall. In this case the Y spindle aids installation of the pressure mounted gates to these types of staircases. The Y spindle wraps around the baluster to provide a secure installation.
On the Gateway® (G-11, G-14), use Y spindles only on the hinge side of the gate. No more than 2 per gate can be used.
On the Center Gateway® models (G-15, G-35), the Y spindle can be used on either side of the gate. However, they must be used on the same side. No more than 2 per gate can be used.
NOTE: For installation of a pressure-mounted gate on a staircase with ballusters on both sides, you will need to use a K10 Installation Kit.
 K-10 Installation Kit
The installation of child safety gates can be difficult since a "one size fits all" gate design does not exist. KidCo has assembled the materials and fasteners necessary to properly install any child safety gate to wood bannisters, hollow wall (drywall) or wrought iron. The KidCo Gate Installation Kit can save several trips to the lumber yard and hardware store. When mounting the gates to unusual surfaces such as brick or concrete, KidCo recommends that you consult a hardware professional, baby shop or baby proofing specialist.
One kit is required for each side of the gate that is not being mounted into a solid vertical wood surface and only the most basic tools are needed to assemble any good child safety gate.. Used for:
- Wood Banister Installation using plastic ties Wrought Iron Installation
- Hollow Wall (Drywall) Installation
Pictured at right: Wood Banister Installation using wood screws
|
KidCo
Safety Gate Extensions