The Philips HeartStart FR2 is a portable, lightweight automated external defibrillator (AED) that requires minimal device training to use and is an essential part of administering first aid immediately to a victim of sudden cardiac arrest. Due to its easy-to-use design, superior technology and affordability, FR2 AEDs are now being placed in a wide range of settings such as hospitals and clinics, offices and industrial locations, airports and airplanes, health clubs and golf courses. This innovative AED technology has also enabled a broader range of people beyond community EMS professionals to provide lifesaving therapy.
The FR2 AED operates with long-life maintenance-free, lithium manganese batteries, which are designed specifically for high-volume consumer applications, where safety and reliability are of the utmost importance. The FR2 performs daily automated self-tests that check readiness for use. Other features include easy-to-follow voice prompts, and a bright LCD display to reinforce the voice prompts, making it easy to use in noisy or dark settings; the FR2 also has enhanced features that can be enabled for improved hand-off to advanced life support (ALS) responders. Additionally, the FR2 has on-board training capabilities when used with the fully rechargeable Training and Administration Pack. This allows users to safely train on the FR2 using realistic training scenarios.
The FR2 AED incorporates a number of breakthrough technologies that distinguish it from other AEDs on the market, including the low-energy SMART Biphasic technology. Additionally, the SMART Analysis system automatically determines if a shock is required and protects against inappropriate delivery of a shock. This feature eliminates the need for the operator to be trained in reading and interpreting the patient's electrocardiogram (ECG).
The FR2+ has come to be a trusted tool of professional responders and designated response teams in the work place and public settings. Its clean, uncluttered design is optimized for fast, efficient operation and rapid delivery of life-saving therapy. Commands are clear, streamlined, confident, and concise: ideal for responders who are trained, drilled, and ready to save a life now.
The HeartStart FR2+ offers features that make hand-off to ALS professionals seamless for maximum continuity of care for the patient.
An ECG display is available. The FR2+ can be configured to allow ALS responders to switch to a manual mode, giving them more decision-making control. And defibrillator pads adapters enable the pads to remain on the patient when transferring to many popular ALS manual defibrillators from Philips and other manufacturers.
But don't be misled by its advanced capabilities. The HeartStart FR2+ is extremely easy to use. Its design is based on years of research, refinement by Philips human factors experts and user testing with the full range of responders from healthcare professionals to lay people. In fact, hundreds of thousands of citizens are already trained and ready to save a life with the FR2+.
Optimized for Challenging Environments
Because of its ruggedness and ability to stand up to temperature extremes and wet conditions, the HeartStart FR2+ is the right choice for harsh, outdoor, or mobile use. It combines natural sounding voice instructions that are loud and clear, with text prompts on a large, bright back-lit display. This makes it ideal if you anticipate use in noisy or poorly lit settings. And at just 4.7 pounds, it's incredibly small and light-weight so it won't weigh you down.
Versatile - The FR2+ is designed to be highly flexible and versatile. You can tailor your FR2+ to match your specific response protocol.
Infant/Child Defibrillation - The FR2+ can treat patients of any age. When equipped with special infant/child defibrillator pads that reduce the energy of the FR2+'s shock, you can safely treat a child or infant in cardiac arrest.
Conscious Monitoring - The reusable 3-leadwire FR2+ ECG assessment module enables the professional responder to proactively use the FR2+ to assess the rhythm of patients who are not in cardiac arrest, but are conscious, breathing, and suspected of being at risk for cardiac distress. This small light-weight defibrillator/monitoring solution is ideal for in- and out-of-hospital patient transport, bike medics, situations requiring long or difficult travel, fire rigs that may be staffed on occasion by paramedics, clinics and physicians offices.
Ready to Use - The HeartStart FR2+ is reliable and virtually maintenance-free. It automatically performs daily, weekly, and monthly self-tests of the battery, electrical components, and subsystems. A highly visible status indicator shows at a glance whether the FR2+ is ready for use.
The Most Thoroughly Proven Therapy - The FR2+ uses the proven SMART Analysis algorithm to ensure that a shock is delivered only if it is appropriate. And Philips low-energy SMART Biphasic waveform delivers a highly effective defibrillation shock that is also gentle to the heart. No other external defibrillation therapy has been supported by more clinical data.
Comprehensive Data Management - To maintain high standards of response timeliness and quality, many organizations place a high premium on detailed retrospective event reporting. The FR2+ facilitates this with an optional data card that records patient heart rhythm, defibrillator use and, if configured, voice recording of the event. The removable data card lets you produce a variety of reports via Coderunner PC software, without taking your FR2+ out of service.
Heartstream FR2 AED Features:
- Daily automated self-tests check FR2's readiness
- Clear, concise, easy-to-follow voice prompts guide the caregivers
- Text messages shown on the bright LCD display reinforce voice prompts
- On-board training capabilities allows users to safely train on the FR2 using realistic training scenarios
- Long-life maintenance-free, lithium manganese batteries
Benefits
- Innovative technology enables a broad range of people - beyond community EMS professionals - to provide lifesaving therapy
- SMART Analysis system automatically determines if a shock is required and protects against inappropriate shock delivery
- Patented low-energy, SMART Biphasic waveform is clinically proven superior to high-energy, monophasic waveforms for efficacy and for minimizing post-defibrillation heart dysfunction
- Easy to use, even in noisy or dark settings
Specifications:
| Defibrillator Model |
With ECG M3860A.
With Text Only Display M3861A. |
| How Supplied |
Defibrillator, instructions for use, standard battery, defibrillator pads (2 pair), quick reference card. |
| Waveform |
Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance. |
| Energy |
Single energy output.
Adults:150 J nominal into a 50 ohm load.
Pediatric: 50 J nominal into a 50 ohm load. |
| Charge Time From Shock Advised |
Typically less than 10 seconds. |
| Shock-to-Shock Cycle Time |
Typically less than 20 seconds (including analysis time) in automated mode. |
| Protocol |
Text and voice prompts guide user through protocol. Follows pre-configured settings. Can be modified with the M3864A training & administration pack. |
| Shock Delivery |
Via defibrillator pads placed in anterior-anterior (lead II) position for adult defibrillation and anterior-posterior for infant/child defibrillation. |
| Controls |
On/off, shock, screen contrast/option buttons. |
| Indicators |
LCD screen, beeper, audio speakers, status indicator, shock button, connector socket LED. |
| Advanced Mode |
Configurable protocol. |
Size
Height
Width
Depth
|
6.6 cm. (2.6 inches).
21.8 cm. (8.6 inches).
21.8 cm. (8.6 inches).
|
Weight
With battery
Without battery |
2.1 kg. (4.7 pounds).
1.8 kg. (3.9 pounds). |
| Screen |
High-resolution LCD with bright back light. |
| Screen Dimensions |
2.8 inches wide x 2.3 inches high (7.0 cm x 5.8 cm). |
| Display Range |
Differential: ±2 mV full scale (nominal). |
| Sweep Speed |
23 mm/second (nominal). |
| Frequency Response |
1 Hz to 20 Hz (-3dB) (nominal). |
| Sensitivity |
1.16 cm/mV (nominal). |
| Heart Rate |
30 to 300 beats per minute updated each analysis period during monitoring. |
| Monitored Lead |
Anterior-anterior (lead II) placement with adult defibrillation pads or ECG Assessment module (M3860A only). |
| Patient Analysis |
Per protocol, evaluates patient ECG and signal quality to determine if a shock is appropriate, and evaluates connection impedance for proper defibrillation pad contact. |
| Sensitivity/Specificity |
Meets AAMI DF-39 guidelines. |
| Type |
12 VDC 4.2 Ah lithium manganese. Disposable, recyclable, long-life, primary cells. |
| Capacity |
Minimum 300 shocks or 12 hours operating time. |
| Install-By Date |
Battery is labeled with an install by date at least 5 years from date of manufacture. |
| Standby Life |
Defines how long the battery will power the AED in standby operation within the standby temperature range (one battery insert test and no uses). 4 years minimum when battery is installed by the Install-By-Date (5 years typical). |
| Configuration |
DP2: two pair or DP6: six pair. |
| How Supplied |
Disposable self-adhesive defibrillation pads with integrated cable and connector. |
| Surface Area |
100 cm2 each (nominal active surface area). |
| Cable Length |
Approximately 122 cm (48 inches). |
| Patient |
Under 8 years or 25 kg (55 pounds). |
| Defibrillator Compatibility |
FR2-series (FR2 and FR2+) automated external defibrillator only. |
| Configuration |
M3870A FR2 Infant/Child Reduced Energy Defibrillator Pads. 1 set per package. |
| How Supplied |
Disposable self-adhesive pads with cable and connector. |
| Energy Delivered |
Reduces defibrillator shock energy to nominal 50 Joules into a 50 ohm load. |
| Surface Area |
44 cm2 each pad (nominal active surface area). |
| Cable Length |
Approximately 122 cm (48 inches). |
| Standard Event Review |
Elapsed time and number of shocks are displayed on screen. |
| Enhanced Event Review |
Optional data card (M3854A) expands the above on-screen event review capabilities. Review chronological events in detail including ECG. 8 Hours of event & ECG recording or one hour if voice recording is activated. |
| Sealing |
Meets IEC529 class IP54 with battery and data card tray installed. |
| Temperature |
Operating: 0º - 50º C (32º - 122º F). Standby: 0º - 43º C (50º - 109º F). Standby applies to AED with battery installed and stored with defibrillation pads. |
| Humidity |
Operating: 0% to 95% relative humidity (non-condensing). Standby: 0% to 75% relative humidity (non-condensing).
|
| Altitude |
-500 to 15,000 feet per MIL-STD-810E 500.3 Procedure II. |
| Aircraft |
Method: RTCA/DO-160D: 1997 Section 21 (Category M -Charging). |
| Shock/Drop Abuse Tolerance |
1 meter any edge, corner or surface. MIL-STD-810E 516.4 Procedure IV. |
| Vibration |
MIL-STD-810E 514.4-17. |
| EMI |
Requirements: Tested to EN60601-1-2 Limits. Radiated: Method EN55011: 1998 Group 1 Level B. Immunity: Method EN61000-4-3:1998 Level 2. |
| Automatic Self-Tests |
Tests internal circuitry, waveform delivery system, and battery capacity. Verifies calibration of key circuits monthly. |
| Automatic Self-Test Frequency |
Daily when stored within operating environmental conditions. |
| Status Indication |
Dynamic visual and audible indication of self-test results. Indicates device readiness. |
| Battery Insertion Test |
Upon battery insertion, extensive automatic self-tests and user inter-active tests check device readiness. Verifies calibration of key circuits. |
| Automatic Standby Temperature Monitoring |
Instrument automatically monitors temperature and warns user if device is stored outside of standby temperature range. |
| Function |
Places FR2+ in scenario-based training mode and disables energy delivery. 10 real-world scripts provided. Permits modification of preprogrammed FR2+ protocol. |
| Type |
12 VDC 1.1 Ah Rechargeable Nickel Metal Hydride. |
| Capacity |
Minimum 4 hours training time. |
| Recharge Time |
90 minutes to full capacity using M3855A charger (sold separately). |
Philips Heart Start Carrying Cases |
Philips M5075A
|
Standard Carrying Case for HeartStart OnSite
The standard carry case is constructed with semi-rigid materials and covered in durable red cordura. The case comes equipped with a pair of paramedic scissors and can accommodate one spare pad cartridge and a spare battery pack.
Dimensions: 9.5" (24 cm) W x 8.5" (21 cm) H x 4.8" (12cm) D
Material: Codura
Use with : HeartStart OnSite (M5066A)
|
|
|
Philips M5076A
|
Slim Carrying Case for HeartStart OnSite
This slim carry case is constructed with semi-rigid materials and covered in durable red cordura. The case holds the HeartStart OnSite Defibrillator and a pair of paramedic scissors.
Dimensions: 9.5" (124 cm) W x 8.5" (21 cm) H x 4.8" (9 cm) D
Material: Codura
Use with : HeartStart OnSite (M5066A)
|
|
|
Philips M3868A
|
Vinyl Carrying Case for HeartStart FR2
A red cordura, semi-rigid carrying case is available to hold the device as well as spare battery and up to 3 sets of pads.
Dimensions: 11" W x 9" H x 5" D
Use with : HeartStart FR2+ (M3861A & M3862A) |
|
|
Philips 989803139251
|
Carrying Case for HeartStart FRx
The rugged FRx carry case made of wipeable urethane was designed to hold the FRx defibrillator as well as its main accessories and supplies. The carrying case is intended for use in environments where the defibrillator is protected from moisture and harsh treatment
Use with : HeartStart FRx (861304) |
|
|
Philips 989803133171
|
Temperature Controlled Carrying Case for HeartStart FR2 Plus
With the Philips Temperature Control Carrying Case, you can safely store your HeartStart FR2-series Defibrillator in the trunk or storage compartment of a vehicle during extreme winter and summer temperatures. It provides protection from temperatures as low as –20°F (-29ºC) and as high as 140°F (60ºC), perfect for utility trucks, police cruisers and other vehicles in which heating or air conditioning isn’t always available. The case’s thermostat-regulated heater can be powered by a 12-volt vehicle battery, while the built-in cut-off module turns off the heater before it depletes the battery. And a thick foam insulation layer slows the heating effect of hot summer days
For Use with: HeartStart FR2+ (M3861A & M3862A) |
|
|
Philips HeartStart Batteries |
Philips M5070A |
HeartStart Four-Year Battery
This battery is a disposable, lithium manganese dioxide, long-life battery that will typically last for four years with the defibrillator in standby mode.
Shelf Life: Typically 4 years with defibrillator in standby mode.
For Use with: HeartStart OnSite (M5066A), HeartStart FRX (861304)
|
|
|
Philips M3863A |
FR2+ Long Life LiMnO2 Battery
Lithiumm manganese battery. Disposable, recyclable, long life.
Battery Life: Minimum 300 shocks or 12 hours operating time
Standby Life: 4 years minimum, 5 years typical when battery is installed by the Install-By-Date
For Use with: HeartStart FR2+ (M3861A & M3862A)
|
|
|
Philips M3848A |
FR2+ Rechargeable Li Ion Battery
In hospital and EMS environments, where the useful life of a defibrillator's disposable battery can be consumed in a relatively short period of time, the FR2+ Rechargeable Battery (M3848A) provides a cost-effective option for frequent-use applications, such as back-to-back sudden cardiac arrest responses and monitoring patients during transport.
This Lithium-Ion battery is fully charged (using the Charger M3849A) in just 3 hours to provide 100 shocks (typical) or 5 hours (typical) of ECG display time. The "fuel gauge" on the FR2+ displays the battery's remaining power. Under normal conditions, the FR2+ Rechargeable Battery withstands 300 charge-discharge cycles or 2.5 years of use.
Standby Life: 6 months
For Use with: HeartStart FR2+ (M3861A & M3862A)
|
|
|
Philips M3849A |
FR2+ Battery Charger for Rechargeable Li Ion Battery
In hospital and EMS environments, where the useful life of a defibrillator's disposable battery can be consumed in a relatively short period of time, the Rechargeable Battery (M3848A) provides a cost-effective option for frequent-use applications, such as back-to-back sudden cardiac arrest responses and monitoring patients during transport.
This Lithium-Ion battery is fully charged (using the Charger M3849A) in just 3 hours to provide 100 shocks (typical) or 5 hours (typical) of ECG display time. The "fuel gauge" on the FR2+ displays the battery's remaining power. Under normal conditions, the Rechargeable Battery withstands 300 charge-discharge cycles or 2.5.years of use.
For Use with: HeartStart FR2+ (M3861A & M3862A)
|
|
|
Philips 989803139301 |
FRX Aviation Battery
For Aircraft Use. Philips replacement Lithium Ion 4-Year Battery for the FRx AED. Delivered to you with Philips' 4-year warranty and 200+ shock capacity, just like your original battery pack. Complies with TSO C-142
Use with : HeartStart FRx (861304)
|
|
|
Philips 989803136291 |
FR2 Plus Aviation Battery
For Aircraft Use. Philips replacement Lithium Ion 4-Year Battery for the FR2 Plus AED. Delivered to you with Philips' 4-year warranty and 200+ shock capacity, just like your original battery pack. Complies with TSO C-142
For Use with: HeartStart FR2+ (M3861A & M3862A)
|
|
|
Philips HeartStart Cabinets |
Philips 989803136531 |
Basic Defibrillator Cabinet
Basic audible siren alarm.
No visual alarm or connectivity to building’s security system
For Use with: HeartStart OnSite (M5066A), HeartStart FR2+ (M3861A & M3862A), HeartStart FRX (861304)
|
|
|
Philips PFE7024D |
Defibrillator Cabinet (surface mount)
The Defibrillator Cabinet, constructed of heavy gauge steel and tempered glass, protects your defibrillator from theft and the elements. Equipped with an audible alarm and flashing lights (powered by two 9-volt alkaline batteries), the Cabinet attracts attention to mobilize assistance during a cardiac emergency or deter theft. Opening the Cabinet's door activates the audible alarm and lights. For locations where a siren is inappropriate, the audible alarm can be disabled.
In buildings with a central security system, your facilities people, or alarm company, can connect the cabinet alarm to your system for a more coordinated response to a cardiac emergency. The alarm can also be connected to a programmable auto-dialer.
The Cabinet is available in two styles: a wall surface mounted Cabinet, for easy installation without cutting into walls, and a semi-recessed model, that is inserted into a wall cut-out, for a less obtrusive look. The semi-recessed model is appropriate where Americans with Disabilities Act (ADA) regulations are a consideration.*
Dimensions: 16" x 22.5" x 6"
* The Americans with Disabilities Act requires that objects not protrude more than 4 inches into foot traffic areas of open aisles and walkways unless the object's bottom edge is no higher than 27 inches from the ground.
For Use with: HeartStart OnSite (M5066A), HeartStart FR2+ (M3861A & M3862A)
|
|
|
Philips PFE7023D |
Defibrillator Cabinet (semi-recessed)
The Defibrillator Cabinet, constructed of heavy gauge steel and tempered glass, protects your defibrillator from theft and the elements. Equipped with an audible alarm and flashing lights (powered by two 9-volt alkaline batteries), the Cabinet attracts attention to mobilize assistance during a cardiac emergency or deter theft. Opening the Cabinet's door activates the audible alarm and lights. For locations where a siren is inappropriate, the audible alarm can be disabled.
In buildings with a central security system, your facilities people, or alarm company, can connect the cabinet alarm to your system for a more coordinated response to a cardiac emergency. The alarm can also be connected to a programmable auto-dialer.
The Cabinet is available in two styles: a wall surface mounted Cabinet, for easy installation without cutting into walls, and a semi-recessed model, that is inserted into a wall cut-out, for a less obtrusive look. The semi-recessed model is appropriate where Americans with Disabilities Act (ADA) regulations are a consideration.*
Dimensions: Inside compartment: 14" x 22.5" x 6", footprint on wall: 16.5" x 24.5" x 2.5" (meets ADA guidelines)
* The Americans with Disabilities Act requires that objects not protrude more than 4 inches into foot traffic areas of open aisles and walkways unless the object's bottom edge is no higher than 27 inches from the ground.
For Use with: HeartStart OnSite (M5066A), HeartStart FR2+ (M3861A & M3862A) |
|
|
Philips M3857A
Secure Seal M3859A (sold in packs of 10)
|
Wall Mount Bracket
The wall mount bracket is designed specifically for housing the Philips Heart Start defibrillator and its accessories. HeartStart OnSite's carrying case can be tethered to the wall mount bracket with the Secure Pull Seal (M3859A) to discourage tampering. A broken seal indicates that the defibrillator has been removed from the Wall Mount and accessories may need to be replenished.
Dimensions: 10.6" W x 8" H x 5" D
Use with : HeartStart OnSite (M5066A) |
|
|
Philips M3858A |
Wall Sign
An AED Wall Sign hanging above a wall mount bracket or defibrillator cabinet gives even greater visibility to the defibrillator. Dimensions: 7" W x 10" H |
|
|
Philips M3854A |
Data Card & Tray
The Philips data card holds approximately 8 hours of incident and ECG information, or one hour with voice recording. One card can hold data from multiple cases. A flash data card reader enables data transfer from the card to a personal computer for use with Philips HeartStart Event Review data management software.
For Use with: HeartStart FR2+ (M3861A & M3862A)
|
|
|
| Philips HeartStart Defibrillator Pads |
Philips DP2 & DP6 |
Adult AED Defibrillator Pads: DP2 / DP6
HeartStart Adult AED Defibrillator Pads, 2- or 6-pack recommended for patients 8-years and older, or above 55 pounds (25kg), are optimized for AED use with Philips FR2-series defibrillators. Constructed of a thin flexible conductor sandwiched between a protective polymer backing and a hydro-gel adhesive, these pads withstand the rigors of CPR and harsh conditions. Soft, flexible and oval shaped, HeartStart Adult AED Pads conform to body contours for ample surface contact and adhesion. The robust lead wire connector is ergonomically designed, enabling fast and easy insertion.
Minimum Shelf Life: 24 months from date of manufacture
For Use with: HeartStart FR2+ (M3861A & M3862A) |
|
|
Philips M3870A |
Infant/Child AED Defibrillator Pads
Infant/Child Reduced-Energy Defibrillator Pads enable minimally trained responders to safely and promptly defibrillate infants and children under 8 years of age or 55 pounds. These special infant/child pads contain electronics that attenuate, or reduce, the energy of the defibrillator's shock from 150 to 50 Joules, an appropriate dosage of SMART Biphasic therapy for infants and small children.* And the FR2-series defibrillator can evaluate children's heart rhythms with outstanding accuracy for appropriate shock/no-shock decisions.**
The pads' design was carefully thought out to ensure that, even for the most inexperienced user under the most stressful circumstances, it is instantly obvious that these pads are for children and infants only. This helps ensure that the correct pads are chosen when you need to be prepared to treat both adults and children. The packaging, graphics, and pink teddy bear-shaped connector clearly communicate pediatric use.
Minimum Shelf Life: 24 months from date of manufacture
For Use with: HeartStart FR2+ (M3861A & M3862A) |
|
|
Philips M5071A
|
Adult SMART Pads Cartridge for HeartStart OnSite
HeartStart Adult SMART Pads are appropriate for cardiac arrest victims 8 years and older, or weighing above 55 pounds (25kg) or more
Shelf Life: Replace every two years
Use with : HeartStart OnSite (M5066A)
|
|
|
Philips 989803139261
|
SMART Pads II for HeartStart FRx
Multifunction defibrillator pads
Use with : HeartStart FRx (861304) |
|
|
Philips M5072A
|
Infant/Child SMART Pads for HeartStart AED
Infant/Child Cartridge - Spare Electrode Pads for Philips HeartStart OnSite AED
Use with : HeartStart OnSite (M5066A) |
|
|
Philips HeartStart Miscellaneous Accessories |
Philips 989803139311
|
Infant / Child Key for HeartStart FRx
Infant/child key used in infant/child defibrillation with the HeartStart FRx Defibrillator. Simply insert the Infant/Child Key into the FRx to signal to the device that you’re treating an infant or a child. The defibrillator adjusts to provide special pads placement and CPR instructions. The pads icons also flash to show you the appropriate pads placement and the device reduces the shock energy to a level more appropriate for an infant or a child (less than 55 pounds or 8 years of age).
Use with : HeartStart FRx (861304)
|
|
|
Philips 68-PCHAT |
Fast Response Kit
The Fast Response Kit contains tools and supplies typically needed for patient care and personal protection: 2 pairs of hypoallergenic nitrile gloves, a Laerdal pocket breathing mask, paramedic scissors, a Gallant chest hair razor, and a large extra-absorbent paper towel. These items are contained in a 5-1/2" x 9-1/2" zippered pouch which can be attached to the handle of the semi-rigid or vinyl carrying cases.
Contains: 2 pairs of nitrile gloves, 1 CPR mask, 1 paramedic scissors, 1 prep razor, 1 large reinforced paper towel, 1 zippered pouch
Use with : HeartStart OnSite (M5066A), HeartStart FR2 (M3861A & M3862A)
|
|
|
Philips M5066-97800 |
Quick Reference Guide - $5
The Quick Reference Guide is a brief instruction guide for defibrillator operators. Its short captions and straightforward drawings break down each step of the defibrillation process.
Use with : HeartStart OnSite (M5066A) |
|
|
Purchaser must have a valid prescription as required by law,
Medical Direction or be a licensed physician.
|
